videodental.com

Cone-Beam Computed Tomography (CBCT) 

Low dosage, high technology

3D designed for dentists

SkyView is the fastest way to approach 3D radiography from within the dental practice. SkyView is the three-dimensional evolution of a panoramic image tailored to todays dental surgeon who requires increased potential with regard to radiology. The software guided procedure enables dental professionals to acquire quality images in fast easy steps. Ideal for achieving 3D reconstruction of the dentition and jaw, it also elaborates excellent panoramic images via dedicated software. Calibration is performed at the time of installation by MyRay professionals. From this moment on you will never look back. SkyView is designed for the dentist who needs to focus on each patient, not on technical issues regarding the instruments used.

SkyView with 6 foot detector

With an 11 cm diameter spherical field of view, SkyView can produce high-resolution images of the entire adult dentition zone, with minimal X-ray doses. The field of view can, however, be translated so as to frame other areas of interest, such as the temporomandibular joints.

SkyView with 9 foot detector

create panoramic views

create cross-sections

measure distance and angles

2D and 3D views

All reconstructions are Dicom 3.0 compatible

Trim and compact design
Thanks to a compact footprint and trim design with a fold-away limb section, SkyView will fit into small surgeries nearly as easily as stand-up panoramic equipment.

Precise and comfortable
Triple axis control via PC or via a patient-table-mounted joystick allows for fast, precise and comfortable positioning.

• Patient Position: Supine
  Positioning: 3 laser guides. Table-side console (right/left) with joystick Virtual console on workstation - Automatic tracking system
  Table movement: Servo-assisted by 3 motors (x-y-z)
  X-ray beam: Conical, variable-field (H.R. Zoom)
  X-ray source: 90kVp, 10 mA (max), pulsed emission
  Total filtration: 11.4 mm Al equivalent
  Focal spot: 0.5 - 0.6 mm (IEC standard)
  Image detector: High Resolution Image Intensifier digital CCD sensor 1000x1000 - pixel 7.4 lum
  Grey levels: 4096 (12 bit)
  Spherical reconstruction volume (FOV): 15cm (9'' detector) - 11 cm (6'' detector) - 7 cm (H.R. Zoom 4'')
  Scan mode: Short scan: 190 degrees - full scan: 360 degrees
  Rotation rate: 2 rpm (12/s) - 3 rpm (18/s)
  Scan time: 10,15,20,30 seconds (standard mode 15 s)
  Standard effective dose: 37 luSv
  Standard irradiation time: 6.88 seconds
  Isotropic voxel dimensions: 0.33 mm (FOV 15 cm) - 0.23 mm (FOV 11 cm) - .16 mm (FOV 7 cm)
  Thickness of axial tomography sections: starting from .05 mm
  Post-processing and preview time: 2-2.5 min (only at end of x-ray acquisition)
  Reconstruction time: 2-4 min
  Overall SkyView dimensions: Width: 1450 mm (6'' detector) - 1535 mm (9'' detector), Length: 2510mm, Height: 1680 mm (6'' detector) 1720 mm (9'' detector)
  Weight: 360Kg
  Power supply: USA and Canada: 115 V AC 50/60 Hz, International: 230V AC 50 Hz
  Absorption: 1400 VA (max) A dedicated line protected from current pulses is recommended
  Class: Electro-mexical equipment, class llb (CCE 93/42, annex IX)
  Certification: CE 0051, cCSAus